China BHS Mixer Wear Liner customized manufacturers
Process:clay sand casting,furan resin sand casting,shell mold casting,water-glass sand casting,lost foam casting(EPC or LFC)
BHS Mixer Wear Liner
Specifications
1.Supply Sany Concrete Mixer Wear Parts
Model:DKX 1.00,DKX 1.25,DKX 1.67,DKX 2.00,DKX 2.25,DKX 2.5, DKX 2.75,DKX 3.00,DKX 3.50,DKX 4.00,DKX 4.50,DKX 5.00,DKX 6.00 etc.
2.Material:(Extra)High Chrome,Nodular Cast Iron,Casting Steel,45# steel
3.Professional Perfomance Mixer Wear Parts Supplier
4.LFC Process
Business Ability and Scope
Material:Ductile casting iron,gray cast iron,stainless steel,carbon steel,low alloy steel,high alloy steel,hardfacing tungsten carbide, Composite Ceramics etc. |
Process:clay sand casting,furan resin sand casting,shell mold casting,water-glass sand casting,lost foam casting(EPC or LFC) |
Application:Sicoma mixer wear parts,SANY mixer wear parts,ZOOMLION mixer wear parts,XCMG mixer wear parts,BHS mixer wear parts,Liebherr mixer wear parts,Eirich mixer wear parts,Teka mixer wear parts, etc. |
Blades, scrapers ,arm guards and wear liners are the most frequently replaced parts of a mixer. Our casting steel,hard-faced tungsten carbide wear parts will help reduce the amount of time (money) you spend on your mixer.
Chemical Data
Nodular Cast Iron QT500-7(for Arms-Spacers-Couplings)
Chemical Composition | ||||||
C | Si | Mn | S | P | Mg | RE |
3.6~3.8 | 2.5~2.9 | 0.6 | 0.025 | 0.08 | 0.03~0.05 | 0.03~0.05 |
Mechanical Properties | |||
Hardness(HBS) | Strength of Extension σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ(%)
|
170~230 | ≥500
| ≥320
| ≥7
|
High Chromium Cast Iron(for Blades-Scrapers-Liners)
Main Chemical Composition(%) | ||||||||
C | Si | Mn | Cr | S | P | Mo | Cu | Ni |
1.7~3.2 | 0.3~1.2 | 0.3~1.0 | 10-28 | ≤0.10 | ≤0.10 | ≤3.0 | ≤1.2 | ≤2.5 |
Mechanical Properties | |||
Hardness(HRC) | AK(J/cm ²) | Flexural Strength ak N.M/CM2 | Micro Structure |
58~64 | ≥2.5
| >700 | M+C |
Production Process & Facilities
Testing Equipment
Package & Delivery
